C++ Programming Code Examples
C++ > Games Code Examples
Piano saves output in c:piano.txt
/* Piano saves output in c:piano.txt */
#include<conio.h>
#include<dos.h>
#include<fstream.h>
void jain(int a)
{
sound((a*8)/2);
delay(300);
nosound();
}
void main(int argc,char *argv[])
{
char anuj;
fstream file1;
file1.open(argv[1],ios::out);
clrscr();
cout<<"PIANO "<<"
Press `q' to exit.
";
while(anuj!='q')
{
jain(anuj);
anuj=getch();
if(anuj!='q')
file1.put(anuj);
}
file1.close();
}
#include is a way of including a standard or user-defined file in the program and is mostly written at the beginning of any C/C++ program. This directive is read by the preprocessor and orders it to insert the content of a user-defined or system header file into the following program. These files are mainly imported from an outside source into the current program. The process of importing such files that might be system-defined or user-defined is known as File Inclusion. This type of preprocessor directive tells the compiler to include a file in the source code program.
In while loop, condition is evaluated first and if it returns true then the statements inside while loop execute, this happens repeatedly until the condition returns false. When condition returns false, the control comes out of loop and jumps to the next statement in the program after while loop. The important point to note when using while loop is that we need to use increment or decrement statement inside while loop so that the loop variable gets changed on each iteration, and at some point condition returns false. This way we can end the execution of while loop otherwise the loop would execute indefinitely. A while loop that never stops is said to be the infinite while loop, when we give the condition in such a way so that it never returns false, then the loops becomes infinite and repeats itself indefinitely.
It is a predefined function in "conio.h" (console input output header file) used to clear the console screen. It is a predefined function, by using this function we can clear the data from console (Monitor). Using of clrscr() is always optional but it should be place after variable or function declaration only. It is often used at the beginning of the program (mostly after variable declaration but not necessarily) so that the console is clear for our output.
Open file. Opens the file identified by argument filename, associating it with the stream object, so that input/output operations are performed on its content. Argument mode specifies the opening mode. If the stream is already associated with a file (i.e., it is already open), calling this function fails. The file association of a stream is kept by its internal stream buffer: Internally, the function calls rdbuf()->open(filename,mode|ios_base::out). The function clears the stream's state flags on success (setting them to goodbit). In case of failure, failbit is set.
In C++ programming we are using the iostream standard library, it provides cin and cout methods for reading from input and writing to output respectively. To read and write from a file we are using the standard C++ library called fstream. Let us see the data types define in fstream library is: • ofstream: This data type represents the output file stream and is used to create files and to write information to files. • ifstream: This data type represents the input file stream and is used to read information from files. • fstream: This data type represents the file stream generally, and has the capabilities of both ofstream and ifstream which means it can create files, write information to files, and read information from files.
The getch() is a predefined non-standard function that is defined in conio.h header file. It is mostly used by the Dev C/C++, MS- DOS's compilers like Turbo C to hold the screen until the user passes a single value to exit from the console screen. It can also be used to read a single byte character or string from the keyboard and then print. It does not hold any parameters. It has no buffer area to store the input character in a program. The getch() function does not accept any parameter from the user. It returns the ASCII value of the key pressed by the user as an input.
In computer programming, we use the if statement to run a block code only when a certain condition is met. An if statement can be followed by an optional else statement, which executes when the boolean expression is false. There are three forms of if...else statements in C++: • if statement, • if...else statement, • if...else if...else statement, The if statement evaluates the condition inside the parentheses ( ). If the condition evaluates to true, the code inside the body of if is executed. If the condition evaluates to false, the code inside the body of if is skipped.
The cout is a predefined object of ostream class. It is connected with the standard output device, which is usually a display screen. The cout is used in conjunction with stream insertion operator (<<) to display the output on a console. On most program environments, the standard output by default is the screen, and the C++ stream object defined to access it is cout. The "c" in cout refers to "character" and "out" means "output". Hence cout means "character output". The cout object is used along with the insertion operator << in order to display a stream of characters.
A program shall contain a global function named main, which is the designated start of the program in hosted environment. main() function is the entry point of any C++ program. It is the point at which execution of program is started. When a C++ program is executed, the execution control goes directly to the main() function. Every C++ program have a main() function.
Our system can create various sounds on different frequencies. The sound() is very useful as it can create very nice music with the help of programming and our user can enjoy music during working in out the program. Sound function produces the sound of a specified frequency. Used for adding music to a C++ program.
The nosound() function in C language is used to stop the sound played by sound() function. The nosound() function is simply silent the system. The sound() and nosound() functions are very useful as they can create very nice music with the help of programming and our user can enjoy music during working in out the program.
delay() function is used to hold the program's execution for given number of milliseconds, it is declared in dos.h header file. There can be many instances when we need to create a delay in our programs. C++ provides us with an easy way to do so. We can use a delay() function for this purpose in our code. We can run the code after a specific time in C++ using delay() function.
Put character. Inserts character c into the stream. Internally, the function accesses the output sequence by first constructing a sentry object. Then (if good), it inserts c into its associated stream buffer object as if calling its member function sputc, and finally destroys the sentry object before returning. Function returns the ostream object (*this).
This C++ program implements a "stack data" structure using two queue data structures. A stack data structure foolows the principle of LIFO(last element in first element out). Enter
